Panasonic TH-37PWD5UZ Operating Instructions Manual

10Basic ControlsTH-42PW5R - STANDBYG POWER ONINPUT — VOL +OFF TIMER buttonThe Plasma Display can be preset to switch to stand-by after a fixed period. Thesetting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timercancelled) each time the button is pressed.30 60090PC buttonPress the “PC” mode selectionbutton to select the PC mode.This button is used to switchdirectly to PC mode.INPUTSURROUNDVOLN RPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCINPUT button(VIDEO(S VIDEO), COMPONENT/RGB, PC Mode Selection)Press to select VIDEO(S VIDEO),COMPONENT/RGB, PC input signalmodes sequentially. (see page 19)Sound mute On/Off (see page 26)VOLUME AdjustmentPress the Volume Up “+” or Down “–” button to increase or decrease thesound volume level.ACTION buttonPress to make selectionsASPECT buttonPress to adjust the aspect.(see page 22)SOUND button (see page 26)SET UP button (see page 20)POSITION buttonsR button (see page 21)STAND-BY(ON/OFF) buttonThe Plasma Display must first be plugged into the walloutlet and turned on at the power switch. (see page 18)Press this button to turn the Plasma Display ON, fromSTAND-BY mode. Press it again to turn the PlasmaDisplay OFF to STAND-BY mode.SURROUND button(see page 27)N button(see page 25, 26, 28)PICTURE button(see page 28)PICTURE POS./SIZE button(see page 24)STATUS buttonPress the “STATUS” button to displaythe current system status.1 VIDEO(S VIDEO), COMPONENT/RGB, PC mode2 ASPECT mode (see page 22)3 OFF TIMERThe off timer indicator is displayed onlywhen the off timer has been set.OFF TIMER 90123VIDEONORMALWhen three minutes remain, “OFF TIMER 3” will flash.The off timer is cancelled if a power interruption occurs.Main POWERON/OFF SwitchVOLUME AdjustmentPress the Volume Up “+” orDown “–” button to increaseor decrease the soundvolume level.INPUT button(VIDEO (S VIDEO),COMPONENT/RGB andPC Mode Selection)(see page 19)Power IndicatorThe Power Indicator will light.• POWER-OFF Indicator not illuminated(The unit will still consume some poweras long as the power cord is inserted intothe wall outlet.)• STAND-BY .....Red• POWER-ON.....GreenRemote controlsensorC.A.T.S sensorPlasma C.A.T.S (Contrast Automatic Tracking System)Plasma C.A.T.S automatically senses the ambient lightconditions and adjusts the brightness and gradationaccordingly,to optimise contrast.(Effective when Picture mode is set to Auto.)