20MULTI PIPMULTIPIPMULTIPIPMULTIPIPA B A B A BB A B A B APC1VIDEO2SELECTSWAP SWAP SWAPPC1VIDEO2VIDEO2VIDEO1PC1VIDEO2AAACBBBDPress repeatedly.Each time pressing this button main picture and sub picture will be displayedas follows below.Press to swap mainpicture and sub picture.[Picture out Picture]Press to select the input mode.Under main Picture and sub picture display,select the picture which you would like tochange input modes.Press to move the sub picture.Each time the location of the sub picture will be moved.Notes:• This button is effective only in the picture in picture.• The sub picture may be hidden by the on screen display, depending on its position.Main picture Sub picture[Picture and Picture] [Picture in Picture]Notes:• Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24).• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity ofthe pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signalsdisplayed on the main picture and depending on the 2-picture display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on themsatisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously;Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)[Example]Input modes switching is possiblePress to change input signal.Main picture label is bright Sub picture label is brightPicture is changedMain picture label is changed Sub picture label is changedMain picture Sub picture Main picture Sub pictureNormalViewing