Panasonic TH-42PD25U/P Operating Instructions Manual

Contents

22First Time SetupFor your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. Ifneeded, follow the menus and procedures displayed on-screen for setting up the features.You can also make the settings in Setup menu (see pages 36, 37).TVPOWERVCR DVDDBS RCVR CBLLIGHTTV/VIDEO A -ANTENNA - BSAP1 2 3AUXASPECTMUTERECALLBBECHVOLCHVOLOKMENU EXITSelect the configuration of RF input depending on the signal source.Press to select Input Setup.Press to select Cable only, Cable/Antenna orAntenna only.Press to enter your selection.This feature allows you to selectively auto scan channels.You can scan All, Analog only channels or Analog & Digital channels.Notes:• If the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the FirstTime Setup menu.• If a CableCARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanneddue to the CableCARD providing the channel map.First Time SetupInput Setup Cable/AntennaAuto ScanSetting12CHVOLCHVOLOKCHVOLCHVOLOKPress to select the sub-menu.Press to start Auto Scan.After Auto Scan is completed, the TV tunes to the first channel found during Auto Scan.CHVOLCHVOLOKFirst Time SetupInput Setup Scan AllAntenna (A) AnalogAntenna (A) Analog & DigitalAntenna (B) AnalogAntenna (B) Analog & DigitalAuto ScanCHVOLCHVOLOK1 Press to select Auto Scan.Press to enter the sub-menu field.2To return to the previous menuPressMENU.To exit the menu screenPressEXIT.Press to start the Auto Scan.All available channels with a signal will beprogrammed into memory.Auto ScanInput Setup