Panasonic TH 42PD50U Operating Instructions Manual

Panasonic TH 42PD50U Operating Instructions Manual Manual pdf 39 page image

39Operating peripheral equipmentProgramming the remote control codePress and hold POWER and OK together, for at least5 seconds.• The mode selection buttons flashes, and then releasePOWER and OK.Select the type of the component.• The selected button lights and all others go out.Enter the 3-digit infrared code (see pages 40-42).• Factory default setting : Panasonic• Press POWER to test the operation.Notes:• If the component does not operate with the remote control, repeat the procedureusing another code. (Some brands have multiple codes.)• If an incorrect code is entered, or if the procedure takes longer than 30 seconds, theprogramming will fail.After selecting the type of component (step 2, above)12Press to select the code.• The code starts from the current device.• Press POWER button to test the operation.• Repeat the steps until the component code is found.It may take many attempts before the correct code isfound.Press to store the code.You can operate other manufacturers’ components using this TV’s remote control.Preparations:• Connect the power cord of the external component to the wall outlet.• Make sure the component is turned off.123DTV RCVR DBS/CBL AUXTV VCR DVD1 2 34 5 67 809CHVOLCHVOLOKCHVOLCHVOLOKR-TUNE PROGRETURNMENUPLAY FFREWTV/VIDEO SLEEP EXITSAP1 2 34 5 67 809ASPECTMUTERECALLFAVORITESTOPPAUSETV/VCR OPEN/CLOSEDVD/VCR CHRECCHVOLCHVOLOKLIGHTPOWERTVDTV RCVR DBS/CBL AUXTV VCR DVDTo find a code not listed in the indexPOWER CHVOLCHVOLOK+