Panasonic TH-42PHD8BK Service Manual

Option Menu for GPH8D seriesGPH8D chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful forspecial function required customers. This should be set at the installation stage.Option menus default setting ContentsOff-timer function Enable Off-timer operation Enable/Disable.Onscreen display On Enable/Disable to display input mode indication after power on and no signalindication.Initial INPUT Off Sets the initial input mode when the power is turned on . Allow input modeselection while power is on.Initial VOL level Off Sets the initial volume level when the power is turned on. Allow Volumecontrol while power is on.Maximum VOL Level Off Sets the maximum volume to desired level. Volume cannot exceed this level.INPUT lock Off Fixes the input mode to AV, Component/RGB or PC. Can not change inputmode by input selection key.Studio W/B Off Set warm mode color temperature to 3,200 Kelvin.Advanced PIP Off Off : Sets normal two screen display mode.On : Sets Advanced PIP mode.Display size Off Adjusts the image display size on screen.On : Sets the image display size approximately 95% of the normal imagedisplay.Button lock Off Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volumeup/down)Remocon User Level Off Remote key invalidation.Off : Valid key is all key of remote.User1 : Valid key are only Stand-by (ON/OFF), Input, Direct input, Status,Surround, Sound mute On/Off, and volume adjustment.User2 : Valid key is only Stand-by (ON/OFF).User3 : All keys are null and voidID select 0 Set ID number from 0 to 100.Remote ID Off Remote ID function On/Off.(While the Remote ID on, standard remote function can not control the unit.)Serial ID Off Serial ID function On/OffSlot power Off Sets the slot power mode while the power is turned on.Allow Optional Terminal Board insert Slots while power is on.V. Installation Off V. Installation function On/OffThis mode is available for TH-42PHD8EK/ES/BK/BS.Note:Turn up the power switch for the upward direction when you set displayvertically.Rotate Off The image rotates 180 degrees (up-down)Note :When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “RemoteID”adjustments, set all the values “Off” so that all the buttons are enabled again.Press the “Volume down” button on main unit together with “R“ button on the remote control and hold for more than 5 seconds.The “SHIPPING” menu is displayed and the lock is released when it disappears.36TH-42PHD8BK / TH-42PHD8BS / TH-42PHD8EK / TH-42PHD8ES