Panasonic TH-42PV600AZ Service Manual

Also see for TH-42PV600AZ: Operating instructions Service manual

Name of measuring instrument Connection RemarksBase Band generatorCondition RemarksSub contrast adjustment is finished.Preparation1. Come out of market mode and input AV1 PAL 100% full white.2. Go into service mode, choose VIDEO Gain2, and check that data is 255.(Check that initial value is the default)Adjustment Remarks1. Check the brightness of main screen and sub screen by watching.2. Go to procedure 3 when the brightness of sub screen is higher than that of main screen.Oppositely, do not adjust and end when the brightness of sub screen is lower than that of mainscreen.3. Adjust VIDEO Gain2 so that the borderline of main and sub screen may become unremarkable bywatching.Press OK button.12. Hotel mode1. PurposeRestrict a function for hotels.2. Access command- Enter to the Service 2 Mode.- Press Information button on remote control and entry to theEAROM EDITOR Mode.- Press the RED/GREEN button to step up/down through theaddress.- Press the YELLOW/BLUE button to step left/right through theaddress.- Press the PROGRAMME UP/DOWN button to step up/downthrough the page.- Press the VOLUME UP/DOWN button to change the functionvalues.- Set the data of EEPROM(ADDRESS 0BAF) to 01.- Press the OK button to memorize the data.Push the Power switch(button) off/on the set(the remote control)45