11ViewingHDMI1/2TVVCR DVDRECTV/AVOK1 2 34 5 67 8 90• Watching Videos and DVDs• Watching TVWatching Videos and DVDsWith the equipment turned OnSelect the external input1It is possible to connect a variety of external equipment to the TV unit. Once the equipment is connected,use the following procedure to view the input. To connect the equipment (p. 22)TV/AVSelect the connector connected to the equipment(AV mode screen)Note• If the externalequipment has anaspect adjustmentfunction, set to"16:9".• For details, seethe manual of theequipment or askyour local dealer.■ To return to TVTV/AV• example: AV1 red PC blue yellowgreenred yellow green yellowblueredblueDisplays the selected connectorSome Panasonic VCR and DVD equipment connected to the TV unit can bedirectly operated with the remote control.• After setting, execute operation confirmation. If there is no operation, set adifferent code.• The respective VCR / DVD code is cancelled when battery has beenexchanged. Set it again.• Depending on the model, operation may not be possible.• In some cases, new products may not be operative.2Rewind / Slow-motion / SearchVCR: Rewind, review (during playback)DVD: Play at slow speedPress and hold to search backwardFast-forward / Slow-motion / SearchVCR: Fast-forward, cue (during playback)DVD: Play at slow speedPress and hold to search forwardPausePause / RestartProgramme Up, Down / SkipVCR: Select programmeDVD: Skip the track or titleREC RecordStart recordingVCR DVD VCR / DVD switchSelect VCR / DVDStandbySet to Standby mode / Turn onPlayPlayback VCR / DVDStopStop the operationsAV1 AV2 AV3 AV4 PC HDMI1/HDMI2■ Remote control setting VCR DVD1 2 34 5 67 8 90VCRManufacturer CodePanasonic / National 10,11,12,13DVDManufacturer CodePanasonic 70, 71Switch to select VCR or DVDEnter the manufacturer code(two digit code)PressPress and holdwhile operating