Panasonic TH-42PW3 Operating Instructions Manual

Also see for TH-42PWD3: User guide Operating instructions Service manual Service manual

4Warnings and PrecautionsWARNING: To prevent damage which may result in fire or shock hazard, do not expose this applianceto rain or moisture.WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Referservicing to qualified service personnel.2) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pinearthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safetyfeature. If you are unable to insert the plug into the outlet, contact an electrician.Do not defeat the purpose of the earthing plug.IMPORTANT: THE MOULDED PLUGFOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse isfitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5amps and that it is approved by ASTA or BSI to BS1362..Check for the ASTA mark ASA or the BSI mark on the body of the fuse.If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until a replacement cover is obtainedA replacement fuse cover can be purchased from your local Panasonic Dealer..If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse shall be removedand the plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off plug isinserted into any 13 amp socket.If a new plug is to be fitted, please observe the wiring code as shown below.If in any doubt, please consult a qualified electrician.WARNING: THIS APPARATUS MUST BE EARTHED.IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:Green-and-Yellow: EarthBlue: NeutralBrown: LiveAs the colours of the wire in the mains lead of this appliance may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows.The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which ismarked with the letter E or by the Earth symbol or coloured GREEN orGREEN-AND-YELLOW.The wire which is coloured BLUE must be connected to the terminal in the plugwhich is marked with the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to the terminal in theplug which is marked with the letter L or coloured RED.How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.WarningThis is a class A product. In a domestic environment this product may cause radio interference in which caseyou may be required to take adequate measures.