Panasonic TH-42PW6 Operating Instructions Manual

Also see for TH-42PW6: Operating instructions

18Selecting the On-Screen Menu LanguageSelect the Input SignalR - STANDBYG POWER ONINPUT MENU ENTER– +VOLMENU ENTER– +VOLINPUTSURROUNDVOLN RINPUTINPUTInput signals will change as follows:SET UP 1/2SIGNALSCREENSAVERINPUT LABELCOMPONENT/RGB-IN SELECTRGBRGB1OSD LANGUAGE ENGLISH (US)POWER SAVE OFFSTANDBY SAVE ONPOWER MANAGEMENT OFFpress to display the SET UP menu.press to select your preferred language.Selectable languagesENGLISH(UK)DeutschFrançaisItalianoEspañolENGLISH(US).......(Chinese)INPUTSURROUNDVOLNPICTURE SOUNDRSET UPpress to select OSD LANGUAGE.SET UPNotes:(1) Input terminal will not be selected if the terminal board is not installedinto the SLOT.(2) Select to match the signals from the source connected to thecomponent/RGB input terminals. (see page 29)(3) In 2 screen display, the same input mode cannot be selected forthe main picture and sub picture.PC ININPUT1 INPUT2 INPUT3Input Signal SelectionPress the INPUT button to select the input signal to beplayed back from the equipment which has beenconnected to the Plasma Display.When a SCART terminal installed, S VIDEO input is switched with theINPUT button.(Example) If a SCART terminal is installed in the Slot1 input.PC INRGB1 INPUT2 INPUT3PC INVideo1 S Video1 INPUT3INPUT2[If Input Label is VIDEO 1, and there is no RGB input at Input 1][If Input Label is VIDEO 1, and RGB input is at Input 1]