Panasonic TH-42PX600U, TH-50PX600U, TX-58PX600U Operating Instructions Manual

Also see for TH-42PX600U: Technical guide Service manual Technical guide Operating instructions Operating instructions manual

41AdvancedEditing and Setting ChannelsApplyCaption detail---Caption selectPresetAuto programANT InModeStart scanAllCableEdit- - -FavoriteApplyNoAddEditCH12345- - -2- - -- - -- - -FavoriteApply- - -- - -- - -- - -CaptionNoYesNoNoNoAddSignal meterCHSignal strengthCurrentPeak level85 %85 %2 - 1Apply12FavoriteFavoriteAuto programANT InModeStart scanAllCableCheck the signal strength if interference is found or freezing occurs on a digital image.Select the station identifierSelect All or AnalogAll: Analog and digitalAnalog: Analog onlySettings are madeautomatically• After completing the setting,select “Apply”. (see below ).• All previous memorizedchannels are erased.setselectSelect “ANT In”Select “Mode”Select “Start scan”Select “Edit”Select the item to be editedselect item to edit(Caption/Favorite/Add)nextEdit• Caption:Changes the station identifier• Favorite:Registers channel to Favorites List• Add:Adds or deletes channelsstartselect(Select Cable or Antenna)selectnextCaptionFavoriteAdd•CaptionPresetCaption detailRename (maximum 7 characters available)Select the number•FavoriteFavorite•Add• Press “OK” button to select “Yes (add)” or “No(delete)”Select “Apply”Press to move cursor to“Apply”Signal intensityselect channelokUse this procedure when changing setting of received channels or changing the channel display.Also, use to add or delete channels from channel list manually.Automatically searches and adds active channels to memory.selectset/nextok(to enteryourprogram)selectnext• If the signal is weak, check the antenna.If no problem is found, consult yourlocal dealer.Note• Not available if “Cable” is selected in “ANT In”(see above).• Effective only for digital antenna channels.• If “Channel lock” (p. 38) is activated and “Auto”, “Manual” or “Signal meter” is selected, “Enter password.” will bedisplayed.