Panasonic TH-42PX6U Operating Instructions Manual

Also see for TH-42PX6U: Technical guide Service manual Operating instructions Operating instructions Service manual

Panasonic TH-42PX6U Operating Instructions Manual Manual pdf 5 page image

5WARNING/CAUTION4 : 3 12This causes the image to remain on the plasma screen(“after image”). This is not considered a malfunction and isnot covered by the warranty.Typical still images■ Do not display a still picture for a long timeDo not place the unit where it’s exposed to sunlight or otherbright light (including reflections).Use of some types of fluorescent lighting may reduce the remotecontrol’s transmission range.■ SetupNotesSMALL PARTS CAN PRESENT CHOKING HAZARD IFACCIDENTALLY SWALLOWED.KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.DISCARD UNNEEDED SMALL PARTS AND OTHEROBJECTS, INCLUDING PACKAGING MATERIALS ANDPLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEINGPLAYED WITH BY YOUNG CHILDREN, CREATING THEPOTENTIAL RISK OF SUFFOCATION.■ Set upDo not place the Plasma TV on sloped or unstable surfaces.The Plasma TV may fall off or tip over.Do not place any objects on top of the Plasma TV.If water spills onto the Plasma TV or foreign objects get insideit, a short-circuit may occur which could result in fire or electricshock. If any foreign objects get inside the Plasma TV, pleaseconsult an Authorized Service Center.This Plasma TV is for use only with the followingoptional accessories. Use with any other type of optionalaccessories may cause instability which could result in thepossibility of injury.(All of the following accessories are manufactured byMatsushita Electric Industrial Co., Ltd.)• Wall-hanging bracket (Vertical) TY-WK42PV3U• Wall-hanging bracket (Angled) TY-WK42PR2U,TY-WK42PR3UAlways be sure to ask a qualified technician to carry out set-up.■ AC Power Supply CordThe Plasma TV is designed to operate on 120 V AC, 50/60Hz.Securely insert the power cord plug as far as it will go.If the plug is not fully inserted, heat may be generated whichcould cause fire. If the plug is damaged or the wall socketplate is loose, they should not be used.Do not handle the power cord plug with wet hands.Doing so may cause electric shocks.Do not do anything that might damage the power cable.When disconnecting the power cable, hold the plug, not thecable.Do not make any modifications to, place heavy objects on,place near hot objects, heat, bend, twist or forcefully pullthe power cable. Doing so may cause damage to the powercable which can cause fire or electric shock. If damage to thecable is suspected, have it repaired at an Authorized ServiceCenter.■ If problems occur during useIf a problem occurs (such as no picture or no sound), or ifsmoke or an abnormal odor is detected from the PlasmaTV, unplug the power cord immediately.Continued use of the TV under these conditions might causefire or permanent damage to the unit. Have the TV evaluatedat an Authorized Service Center. Servicing of the TV by anyunauthorized personnel is strongly discouraged due to its highvoltage dangerous nature.If water or foreign objects get inside the Plasma TV, if thePlasma TV is dropped, or if the cabinet becomes damaged,disconnect the power cord plug immediately.A short may occur, which could cause fire. Contact anAuthorized Service Center for any repairs that need to bemade.Do not cover the ventilation holes.Doing so may cause the Plasma TV to overheat, which cancause fire or damage to the Plasma TV.If using the pedestal, leave a space of 3 15/16” (10 cm) ormore at the top, left and right, 2 3/8” (6 cm) or more at thebottom, and 2 3/4” (7 cm) or more at the rear.■ When using the Plasma TVBe sure to disconnect all cables before moving the PlasmaTV.Moving the TV with its cables attached might damage thecables which, in turn, can cause fire or electric shock.Disconnect the power plug from the wall outlet as a safetyprecaution before carrying out any cleaning.Electric shocks can result if this is not done.Clean the power cable regularly to prevent it frombecoming dusty.Built-up dust on the power cord plug can increase humiditywhich might damage the insulation and cause fire. Unplug thecord from the wall outlet and clean it with a dry cloth.This Plasma TV radiates infrared rays; therefore, it mayaffect other infrared communication equipment.Install your infrared sensor in a place away from direct orreflected light from your Plasma TV.Do not climb up onto the television or use it as a step.(Young children should be made particularly aware of thiscaution.)If the unit falls over or becomes damaged through misuse,injury may result.The TV will still consume some power as long as the powercord is inserted into the wall outlet.Channel number and other logosImage displayed in 4:3 modeVideo game Computer imageWARNINGCAUTION