115.3. Hotel mode1. PurposeRestrict a function for hotels.Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu, pleaseenter the following command (within 2 second).[TV] : Vol. [Down] + [REMOTE] : AV (3 times)Then, the Hotel mode setup menu is displayed.2. To exit the Hotel mode setup menuDisconnect AC power cord from wall outlet or switch offthe power with the [POWER] button on the main unit.3. Explain the Hotel mode setup menuitem FunctionHotel Mode Select hotel mode ON/OFFInitial INPUT Select input signal modes.Set the input, when each time power is switchedon.Selection :Off/Analogue/DVB/AV1/AV2/AV2S/AV3/AV3S/Comp./PC/HDMI1/HDMI2/HDMI3• Off: give priority to a last memory. However,Euro model is compulsorily set to TV.• AVnS/AVnC: only Euro model selectable• PC: selectable with VGA optionInitial POS Select programme number.Selection :Off/0 to 99• Off: give priority to a last memoryInitial VOL level Adjust the volume when each time power isswitched on.Selection/Range :Off/0 to 63• Off: give priority to a last memoryMaximum VOLlevelAdjust maximum volume.Range :0 to 63Button lock Select local key conditions.Selection :Off/SETUP/MENU/All• Off: altogether valid• SETUP: only F-key is invalid(Tuning guide(menu) can not be selected.)• MENU: only F-key is invalid(only Volume/Mute can be selected.)• ALL: altogether invalid.Remote lock Select remote control key conditions.Selection :Off/SETUP/MENU• Off: altogether valid• SETUP: only Setup menu is invalid• MENU: Picture/Sound/Setup menu are invalid