Panasonic TH-50PH10UKA Operating Instructions Manual

Also see for TH-58PH10UKA - 58" Plasma Panel: Operating instructions manual Manual de instrucciones Manual

41Item Effect AdjustmentsOff-timerfunction Enable DisableEnable: Enables the “Off-timer function”.Disable: Disables the “Off-timer function”.Note: When “Disable” is set, the Off-timer is cancelled.Initial PowerModeNormal Standby OnSets the power mode of the unit for when the power recovers from failure or after plugging off and in again.Normal: Power returns in as the same state as before the power interruption.Standby: Power returns in standby mode. (Power Indicator : red/orange)On: Power returns in power On. (Power Indicator : green)Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.ID selectSets panel ID number when panel is used in “Remote ID” or “Serial ID”.Set value range: 0 - 100(Standard value: 0)Remote ID Off OnOff: Disables ID remote control functions. You can use normal remote control operations.On: Enable ID remote control functions.Serial ID Off OnSets the panel ID Control.Off: Disables external control by the ID.On: Enables the external control by the ID.Display size Off OnAdjusts the image display size on screen.Off: Sets the normal image display size on screen.On: Sets the image display size approximately 95 % of the normal image display.Off OnNotes:• This setting is valid only when the input signals are as follows;NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD))525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)• This setting is invalid when two screen display, digital zoom or Multi screen is selected.• When “Display size” is set to “On”, “POS. /SIZE” adjustment cannot be used.• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.Studio W/B Off OnOff: Nullify all the settings adjusted.On: Sets the color temperature for TV studio.Note: Valid only when the low is set as color temperature on screen adjustment.Studio Gain Off OnSharpens the contrast for a better view when a part of the image is too light to see.Off: Disables “Studio Gain”.On: Enables “Studio Gain”.Note: This setting is valid only when the input signals are as follows:Component Video, RGB (analog), SDI, HDMIOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain2/3Options Adjustments