12.2. Contents of Option MenuThis chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful forspecial function required customers. This should be set at the installation stage. The end user could not set or change thesebecause of hidden On screen menu.Option menus default setting ContentsOff-timer function Enable Off-timer operation Enable/Disable.On Screen display On Enable/Disable to display input mode indication after power on and no signalindication.Initial Input Off Sets the initial input mode when the power is turned on . Allow input modeselection while power is on.Initial VOL. level Off Sets the initial volume level when the power is turned on. Allow Volume controlwhile power is on.Maximum VOL. Level Off Sets the maximum volume to desired level. Volume cannot exceed this level.INPUT lock Off Fixes the input mode to AV, Component/RGB or PC. Can not change inputmode by input selection key.Button lock Off Enable/Disable front operation buttons (Input and/or volume up/down)Studio W/B Off Set warm mode color temperature to 3,200 Kelvin.Remocon User Level Off Remote key invalidation.Off : Valid key is all key of remote.User1 : Valid key are only Stand-by (ON/OFF), Input, Status, Surround, Soundmute On/Off, and volume adjustment.User2 : Valid key is only Stand-by (ON/OFF).User3 : All keys are null and voidID Select 0 to 100 Set ID number from 001 to 100.Remote ID Off Remote ID function On/Off.(While the Remote ID on, standard remote function can not control the unit.)Serial Off Serial ID function On/OffSlot power Off Sets the slot power mode the power is turned on.Allow Optional Terminal Board insert Slots while power is on.Note :How to set Remocon User Level and Remote ID off1. Access service mode (CAT-mode) and press SET UP key on remote.2. Accsess option menu.3. Change Remocon User Level and/ or Remote ID set to Off.30TH-50PHW6BX / TH-50PHW6EX / TH-50PHD6EX / TH-50PHD6BX / TH-50PHD6UY