11 Hotel Mode Access11.1. PurposeRestrict a function for hotels.11.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu, please enter the following command (within 2 second).[TV] : Hold Vol [Down] + [Remote] : Press AV button 3times.Then, the Hotel mode setup menu is displayed.11.3. To exit the Hotel mode setup menu.Disconnect AC power cord from wall outlet or switch off thepower with the [POWER] button on the main unit.11.4. Explain the Hotel mode setup menu.Item FunctionHotel Mode Select hotel mode ON/OFFInitial INPUT Select input signal modes.Set the input, when each time power is switched on.Selection :Off/Analogue TV/Digital TV/AV1/AV2/AV3/PC/HDMI 1/HDMI 2/HDMI 3:•••• Off: give priority to a last memory.•••• Selectable input is depend on the model.Initial VOL level Adjust the volume when each time power is switched on.Selection/Range :Off/0 to 100•••• Off: give priority to a last memory.Maximum VOLlevel Adjust maximum volume.Range :0 to 100Initial POS Select programme number.Selection :Off/0 to 99•••• Off: give priority to a last memory.Button lock Select local key conditions.Selection :Off/SETUP/MENU/All•••• Off: altogether valid.•••• SETUP: only F-key is invalid.(Tuning guide (menu) can not be selected.)•••• MENU: only F-key is invalid.(only Volume/Mute can be selected.).•••• ALL: altogether invalid.Remote lock Select remote control key conditions.Selection :Off/SETUP/MENU•••• Off: altogether valid..•••• SETUP: only Setup menu is invalid.•••• MENU: Picture/Sound/Setup menu are invalid.19TH-L32X10A