- 37 -1) Press (blue) to edit2) Enter characters (maximum 5 characters) with / / / ornumeric buttons, and press OK to set3) Press RETURN to store= Note =● If a VCR is connected only with the RF cable in Analogue TV, edit VCR.Auto TuningAutomatically retunes the channels received in the area.● All the previous tuning settings are erased.● Search begins in the order from the lower channels to the higher channels.● If tuning has not been done completely, set Manual Tuning.Watching Tuning and editing channels Manual Tuning1. Select Auto Tuning with / and press OK to access2. The confirmation screen is displayed and press OK to start Auto Tuning(Settings are made automatically)● When the operation is completed, the channel at the lowest position willbe displayed.● This setting is applicable only for the selected TV mode.■ Auto Tuning using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds todisplay the menu2. Set Auto Tuning with following control panel buttons● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU button.
