Panasonic TU-CTH100 User Manual

Contents

TU-CTH1008Start UpConnect your PVR as shown on the previous page and switch on using either theStandby On/Off key on the remote control or the Power Button on the front of the PVR.The Panasonic start up screen will be displayed and then the Auto setup feature willbegin, your stations will be located, sorted into order and stored ready for use.During Auto Setup the front display will show AUTO SETUP. When Auto Set Up hasfinished, the front display will show the name of first channel stored. If you haveconnected the PVR to TV with an RF cable, you will have to tune the TV in order to viewthe signal from the PVR.Note: If broadcasts are being received from more than one transmitter, regionalvariations of channels will be placed at position 800 and above.The Picture and Sound Menu will be displayed. Use the Up/Down cursor keys toselect each of the following menu options:RF OutputThe PVR will automatically allocate an available channel position for RF output. Shouldthere be any interference you can change the RF output channel using the number keysor you can switch off the RF output by inputting 00. Press the OK key to store. Do notswitch off the RF output if the PVR is not connected to a TV by SCART cable.AV1 OutputAllows the user to select the type of output signal from the AV1 (TV) SCART. Select fromRGB, Video and S-Video using the left/right cursor keys. Press the OK key to store.Please consult your TV user manual for the preferred signal format.AV2 OutputAllows the user to select the type of output signal through the AV2 (EXT) SCART. Selectfrom Video and S-Video using the left/right cursor keys. Press the OK key to store.Please consult your recorder user manual for the preferred signal format.Picture AspectAllows the user to select the ratio in which their picture is displayed. Select yourpreferred Picture Aspect, either 4:3 or 16:9. Press the OK key to store.To exit this screen, select the Continue to Owner ID option and press the OK key.Owner ID ScreenThis screen allows the user to enter their personal details. This may assist the police ifthis box is stolen.This information can be protected by means of a PIN number.Use the up/down cursor keys to step through each digit position and the left/rightcursor keys to select the correct number or letter (The characters available aredisplayed at the bottom of the screen).PIN numberThis is your own personal number which will need to be entered each time the Owner IDmenu is accessed. You do not have to enter a PIN number.NameThe user can enter their name.House No.The user can enter their house number.PostcodeThe user can enter their postcode.Once all the information has been entered, press the OK key to store and exit the Owner ID screen. Confirm that youwish to store the settings by pressing the OK key.To exit the Owner ID screen without inputting any information just press the EXIT key.You can now begin viewing Programmes.

/ 8

Related manuals for Panasonic TU-CTH100