- 193 -No image can be displayed● Check the correct input mode is selected.● Check the setting of AV2 (COMPONENT / VIDEO) in Input Selection tomatch the output of the external equipment.Watching > External equipment● Is Contrast, Brightness or Colour in the Picture Menu set to the minimum?Watching > For best picture > Basic settings● Check all required cables and connections are firmly in place.Blurry or distorted image (no sound or low volume)● Reset channels.Watching > Tuning and editing channels > Auto SetupThere may be red, blue, green and black spots on the screen● This is a characteristic of liquid crystal panels and is not a problem. Theliquid crystal panel is built with very high precision technology giving youfine picture details. Occasionally, a few non-active pixels may appear onthe screen as a fixed point of red, green, blue or black. Please note thisdoes not affect the performance of your LCD.Digital TVBefore requesting service or assistance, please follow these simple guides tosolve the problem.If the problem still persists, please contact your local Panasonic dealer forassistance.Block noise, frozen or disappearing image occurs / Some channels cannot betuned● Check the position, direction and connection of the aerial or dish.● Check Signal Condition. If Signal Quality is displayed in red, the DVBsignal is weak. Connecting the aerial to the TV directly may improve signalquality than connecting the aerial through the equipment (Set top box,DVD, etc.).Watching > Tuning and editing channels > Signal ConditionWatching > Basic > Basic connection
