Panasonic TX-28DK1 Operating Instructions Manual

29What You See Is What You Record (DIRECT TV RECORDING)This will allow the immediate recording of the program currently shown on the Television.Press the DIRECT TV REC button on the remote controlDIRECTTV RECIf the VCR is in Standby mode with a useable tape inserted, it will automatically switch on when you press the DIRECT TV REC button.If a “Q--Link” VCR is connected a message will appear on the TV screen showing what is being recorded, or if it is not possible to record.Some “Q--Link” compatible VCR’s will only display the message when on the VCR programme position(0) or in AV mode. Refer to theVCR operating instruction book.VCR recording preset prog VCR recording TV sourceNo recording -- NO TAPENo recording -- TAPE IS PROTECTEDVCR is recording the programme signal from itsown tuner. If you wish you can switch off the TVand leave the VCR recording in the normal way.VCR is recording the programme signal from the television.You must not change programme position or switch off the TV: ifyou do, the VCR will automatically stop recording and switch off.The write protection tab on the back of the cassettehas been removed.No recording -- VCR IS PLAYING No recording -- TAPE MAY BE DAMAGEDVCR Recording VCR external No recording -- NO SOURCE AVAILABLEExamples of other messages that might be displayed are:Recording this programme nowNo recording -- ALREADY RECORDING!TV / VCR Auto Power On(With a Panasonic Q--Link VCR connected, this additional feature is available).D If you insert a tape in the VCR and press the Play button whilst the TV is in ’Standby’ mode, the TV will automatically switch Onand select the AV2 input so that you can view the tape.Some other VCR’s may support this feature. Refer to the VCR operating instruction book.VCR Auto Power Standby(With a Panasonic Q--Link VCR connected, this additional feature is available).When the TV is switched into ’Standby’ mode, the VCR will also switch into ’Standby’ mode if there is no tape in the VCR, orif there is a tape in and the VCR is in ’Rewind’ or ’Stop’ mode (if the VCR is rewinding a tape, it will not switch into ’Standby’ mode untilrewinding has finished).Some other VCR’s may support this feature. Refer to the VCR operating instruction book.VCR Image View On(With a Panasonic Q--Link VCR connected, this additional feature is available).If the TV is in Standby mode and the VCR sends a menu to be displayed on the TV screen (e.g. Main menu), the TV will automaticallyswitch On and the menu will be displayed.Some other VCR’s may support this feature. Refer to the VCR operating instruction book.Q--LINK