105TV > VCR DOWNLOAD IN PROGRESSPLEASE WAITPROGRAMME : 48REMOTE CONTROL UNAVAILABLETV to VCR DownloadIf a “Q--Link”, “NEXTVIEWLINK” or compatible VCRhas been connected to the AV2 socket beforestarting Step 1, programme information will bedownloaded to the VCR.Downloaded tuning information will match thetelevision’s.Not all VCRs support this download ofprogramme information, some may require to bestarted manually.Refer to the VCR operating instruction book.If a VCR other than those described above hasbeen connected, then there will be no downloadoperation.BBC1Notes :If the VCR has not accepted download data from the TV, you may need to select the Download option from the VCR’s menu system.Refer to the VCR operating instruction book.If Q--Link is not operating correctly, check the following :D The Scart cable is connected to the TV’s AV2 Scart socket.D The Scart cable is connected to the VCR’s compatible (Q--Link, NEXTVIEWLINK or similar technology) Scart socket.D The Scart cable is a “fully wired” type.For further information on Q--Link and connecting equipment, see pages 29, 35 and 36.*1. If, after Auto Setup is complete, the programme position of the digital satellite receiver is not to your preference, you canre---arrange the programme position. Refer to the Programme edit menu --- see page 20 for details.*2. The sorting order depends upon the TV signal, the broadcasting system, and reception conditions. If either BBC1, BBC2 orITV are not located, then their respective pre---allocated programme positions (1 to 3) will remain unused.ProgrammePositionAll stationsavailable No Channel 5 No Channel 5/ S4CNo Channel 4/ Channel 5 No S4C No Channel 4/ S4CNo Channel 4 / S4C /Channel 51 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC12 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC23 ITV ITV ITV ITV ITV ITV ITV4 Channel 4 Channel 4 Channel 4 S4C Channel 4 Channel 5 Satellite5 S4C S4C Satellite Satellite Channel 5 Satellite ~6 Channel 5 Satellite ~ ~ Satellite ~ ~7 Satellite ~ ~ ~ ~ ~ ~Note :~ The next available channel will appear, if no other stations are available then the Programme position will remain unused.QUICK START GUIDE