Panasonic TX-32DSN608 Operating Instructions Manual

English26Timer ProgrammingThis function allows you to select programmes that youwant to be reminded to watch or record to the USBHDD. For details, refer to [eHELP] (Recording > TimerProgramming).1 Select DVB-S, DVB-C, DVB-T orDVB-via-IP2 Display the menu and select [Timer]Timerselectaccess3 Select [Timer Programming]selectaccessSet timer event details1 Start making the settings2 Select [USB HDD Rec.] or [Reminder][USB HDD Rec.]:Records the programme to the USB HDD.When the start time comes, the channel will beswitched automatically and the video and audiosignals will be output. 2 minutes before the start time,a reminder message may appear if you are watchingTV.[Reminder]:Reminds you to watch the programme.When you are watching TV, a reminder messageappears 2 minutes before the start time.Press the OK button to switch to the programmedchannel.3 Select and set the item (channel, date, start time, endtime) (repeat the operations as below)select the itemset and can also be entered with numericbuttons.7 BBC7 17:00 18:30STTL18:00 20:003 ITV1 21:30 22:30Red CapBBC ONE1GuideTimer ProgrammingFunction No. Date Start EndChannel NameWed 21.10.2015 10:46USB HDD Rec.USB HDD Rec.Reminder Wed 21.10.2015(90 min.)(120 min.)(60 min.)Wed 21.10.2015Thu 22.10.2015Function [USB HDD Rec.] / [Reminder]TV mode[ ]: DVB-S[ ]: DVB-C[ ]: DVB-T[ ]: DVB-via-IP You cannot change the mode within themenu.Channel position, channel name, etc.Displays subtitles (if available) To set subtitles for [Reminder](yellow)DateStart time / End time / Duration (automaticdisplay): Overlapped timer events[Signal Supported Recording] (if available) This function is Timer Programming whichis controlled by information from the TVGuide; if programme start and end times arechanged by the broadcaster, the timer eventwill follow the change. Note that this functiononly works reliably if correct information isreceived from broadcasters.4 Store To edit a timer eventselect the eventaccessCorrect as necessary To delete a timer event(red) To cancel a timer event temporarily(blue)• Press again to stop cancelling.