Advanced25• Tuning ProgrammesSet allprogrammesautomaticallyAuto SetupAuto SetupThis will take about 3 minutes.CH 29Channel Service NameCH 33Analogue: 2SearchingScan 2 99 21 41EXITRETURNStart Auto SetupAll tuning data will be erasedAuto SetupStart Auto Setup Settings are made automatically• All the previous tuning settings are erased.• The programme, language, country / region settings are downloaded to a Q-Link orVIERA Link compatible equipment connected to the TV.• When the operation is completed, the programme at programme position “1” will bedisplayed.• If tuning has not been done completely “Manual Tuning”Automatically retune all programmes received in the area.• If a Child Lock PIN number (p. 26) has been set, it must be entered.SetprogrammemanuallyManualTuning1 BBC1CH33Manual TuningSound SystemManual Tuning 2 99 4121Fine TuningSC1Colour System AutoCH33 Fine TuningUse to make small adjustments to the tuning of an individual programme (affected byweather conditions, etc.) Manual TuningSet programme manually after Auto Setup.• Set Sound System and Colour System, and then perform this function.Normally set Colour System “Auto”.• If a VCR is connected only with the RF cable, select programme position “0”.Search and storeSelect the programmeSC1: PAL B, G, H / SECAM B, GSC2: PAL ISC3: PAL D, K / SECAM D, KF: SECAM L / L’Select the programme positionVCR1 324 657 980 storesearch For Auto Setup, using the buttonson the side of the TV (p. 7)Press repeatedly until “Auto Setup” appearsAccess “Auto Setup”Start “Auto Setup”• To return to TV