- 72 -3D Settings1. Display the menu with MENU.2. Select Picture > 3D Settings with / and press OK to access.3. Select one of the following items with / and press OK to access.3D Detection / 3D Signal Message / 3D Refresh Rate / 2D→3D Depth /3D Adjustment / L/R Picture Swap / Edge Smoother / Safety Precautions4. Set with / and press OK to store.● To exit the menu screenEXIT3D Detection(On (Advance) / On / Off)Selects whether to switch to the 3D mode automatically or not.On (Advance):Detects all the 3D format signals and displays the 3D imageautomatically.On:Detects the particular 3D format signals (Frame Sequential, etc.) anddisplays the 3D image automatically.● To view 3D images without any notifications and operations, set to On(Advance).3D Signal Message(On / Off)Selects whether to give a notification message when a signal of 3D format isfound or not.● Not valid when 3D Detection is set to On (Advance)● For DVB, Component and HDMI input3D Refresh Rate(Auto / 100Hz / 120Hz)Reduces juddering and flicker noises of the 3D images when using the 3DEyewear.100Hz:If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
