Panasonic TX-40ESR500 Service Manual

TX-40ESR500125.7. Hotel mode5.7.1. PurposeRestrict a function for hotels.5.7.2. Access command to the Hotelmode setup menuIn order to display the Hotel mode setup menu,please enter the following command (within 2 seconds).[TV]: Vol.[Down] + [REMOTE] : AV (3 times)Then, the Hotel mode setup menu is displayed.5.7.3. To exit the Hotel mode setup menuSwitch off the power with the [POWER] button on the main unitor the [POWER] button on the remote control.5.7.4. Explain the Hotel mode setup menuItem FunctionHotel Mode Select hotel mode On/OffInitial INPUT Select input signal modes.Set the input, when each time power is switchedon.Selection :Off, Analogue TV, Digital TV, AV, HDMI1, HDMI2,HDMI3• Off: give priority to a last memory.Initial POS Select programme number.Selection :Off/0 to 99• Off: give priority to a last memoryInitial VOL Level Adjust the volume when each time power isswitched on.Selection/Range :Off/0 to 100• Off: give priority to a last memoryMaximum VOLLevelAdjust maximum volume.Range :0 to 100Button Lock Select local key conditions.Selection :Off/SETUP/MENU• Off: altogether valid• SETUP: only F-key is invalid(Tuning guide (menu) can not be selected.)• MENU: only F-key is invalid(only Volume/Mute can be selected.)Remote Lock Select remote control key conditions.Selection :Off/SETUP/MENU• Off: altogether valid• SETUP: only Setup menu is invalid• MENU: Picture/Sound/Setup menu are invalidPrivate Information Select private information for VIERA Cast is Keepor Reset if Hotel mode is set to [On] when TVpower on.Selection :Keep/Reset• Keep: private information for VIERA Cast iskeep• Reset: private information for VIERA Cast isreset