Hotel Mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menu.In order to display the Hotel mode setup menu,please enter the following command (within 2 second).[TV] : Vol.[Down] + [REMOTE] : AV (3 times)Then, the Hotel mode setup menu is displayed.3. To exit the “Hotel mode”:Switch off the power with the [POWER] buttonon the main unit or the [POWER] buttonon the remote control or pressing [EXIT] buttonon the remote control.4. Explain the Hotel mode setup menu.ITEM FunctionHotel Mode Select hotel mode ON/OFFInitial INPUT Select input signal modes.Set the input, when each time power is switched on.Selection:Off/Analog/DVB/AV1/AV2/HDMI1/HDMI2/HDMI3*Off: give priority to the last memory. However, EuroModel is compulsorily set to TV.Initial POS Select programme number.Selection:Off/0 to 99*Off: give priority to the last memoryInitial VOL Level Adjust the volume when each time power isswitched on.Selection/Range:Off/0 to 100*Off: give priority to the last memoryMaximum VOLLevelAdjust maximum volume.Range:0 to 100Button Lock Select local key conditions.Selection:Off/SETUP/MENU*Off: altogether valid*Setup: only F-key is invalid(Tuning guide (menu) can not be selected.)*MENU: only F-key is invalid(only Volume/Mute can be selected.)Remote Lock Select remote control key conditions.Selected”Off/SETUP/MENU*Off: altogether valid*Setup: only Setup menu is invalidMENU: Picture/Sound/Setup menu are invalidPrivateInformationSelect private information for VIERA Cast is Keep orReset if Hotel mode is set to [On] when TV poweron.Selection :Keep/Reset•Keep: private information for VIERA Cast is keep•Reset: private information for VIERA Cast is resetHotel modeHotel mode Offnitial INPUT OffInitial POS OffInitial VOL Level OffMaximum VOL Level 100Button Lock OffRemote Lock OffPrivate Information KeepSelectRETURNChange16