Panasonic TX-50A300E Operating Instructions Manual

Contents

English - 7 -NOTE: When connectinga device via the YPbPr orS i d e AV i n p u t , y o u m u s tu s e c o n n e c t i o n c a b l e s t oenable connection. See theillustrations on the left side. | Toenable PC audio, you will needto connect an AUDIO cable tothe side audio inputs. | If anexternal device is connectedvia the SCART socket, the TVwill automatically switch to AVmode.| When receiving DTVchannels (Mpeg4 H.264) orwhile in Media Browser mode,output will not be available viathe scart socket. | When usingthe wall mounting kit (optional),we recommend that you plug allyour cables into the back of theTV before mounting on the wall.| Insert or remove the CI moduleonly when the TV is SWITCHEDOFF. You should refer to themodule instruction manual fordetails of the settings. | EachUSB input of your TV supportsdevices up to 500mA. Connectingdevices that have current valueabove 500mA may damage yourTV. By connecting an HDMI cableto your TV, you have to use only ashielded HDMI cable to guaranteea sufficient immunity againstparasitic frequency radiation.Connector Type Cables DeviceScartConnection(back)VGAConnection(back)SIDE AV PC/YPbPrAudioConnection(side)Side Audio/VideoConnection Cable(Supplied)PC Audio Cable(Not supplied)HDMIConnection(back)SPDIFF(Coaxial Out)Connection(back)YPBPRYPbPr VideoConnection(side) YPbPr ConnectionCable (supplied)SIDE AV Side AV(Audio/Video)Connection(side)AV Connection Cable(supplied)HEADPHONEHeadphoneConnection(side)USBConnection(side)CIConnection(side)CAMmoduleGetting StartedConnectionsIf you want to connect adevice to the TV, makesure that both the TV andthe device are turned off beforemaking any connection. After theconnection is done, you can turnon the units and use them.