- 107 -Signal ConditionSelects a channel and checks the signal condition with indicators.● A good Signal Strength is not an indication of suitable signal for Freesat /DVB reception.● Vertical lines show the maximum signal value of the selected channel.● To change the channel● For Freesat and DVBAdd New ChannelsYou can add any new channels found automatically to channel list.1. The signal condition is displayed and press OK to access.● If you select Any Satellite in Auto Setup, this step is skipped.● It takes a while to check the connection for your selected satellite.● Ensure that the Signal Lock status is shown as Locked. If it is notlocked, the search cannot be executed.● If the status is shown as Not locked and Signal Quality / SignalStrength have no indications, please check the dish alignment.2. Select the search mode with / and press OK to start Add NewChannels.● New channels can only be added to the existing channel list from thesame satellite.
