Custom - Wireless Access PointYou can use the TV as a wireless access point and connect the networkequipment without an access point.● Confirm the PIN code, network settings of the equipment before startingsetup. For details, read the manual of the equipment.1. Display the menu with MENU.2. Select Network > Network Connection > Custom > Wireless Access Pointand press OK to access.3. Select Connect to device in WPS and press OK to access.● To set manually, select Change settings (see below).4. Select and set WPS(Push button) / WPS(PIN) and press OK to access.WPS(Push button):Set up the equipment for WPS(Push button). For details, read themanual of the equipment.WPS(PIN):Enter the PIN code of the equipment.● If the connection fails, check the settings and positions of theequipment. And then, follow the on-screen instructions.■ Change settingsYou can set up Network name(SSID), Encryption key, Wireless type andChannel setting method manually.Follow the on-screen instructions and set manually.● Set Reset settings to reset the items for Change settings.= Note =● You cannot connect the internet service while the TV is set to WirelessAccess Point.● You can connect up to 7 devices. But the transfer rate varies according tocommunication environment or the numbers of connected equipment.● To confirm the current network settingsNetwork > Network settings > Network Status● Ensure the equipment to connect supports WPS for this setup.● WPS: Wi-Fi Protected Setup™- 197 -
