Hotel Mode1.PurposeRestrict a function for hotels.2.Access command to the Hotel mode setup menu.In order to display the Hotel mode setup menu,please enter the following command (within 2 second).[TV] : Vol.[Down] + [REMOTE] : AV (3 times)Then, the Hotel mode setup menu is displayed.3. To exit the “Hotel mode” menu press the EXITbutton on remote control.4. Explain the Hotel mode setup menu.ITEM FunctionHotel Mode Select hotel mode ON/OFFInitial INPUT Select input signal modes.Set the input, when each time power is switched on.Selection:Off/Analog/DVB-C/DVB-T/AV1/ AV1S/AV2/Component/HDMI*Off: give priority to a last memory. However, EuroModel is compulsorily set to TV.*AVnS/AVnC: only Euro model selectable* PC: selectable with VGA optionInitial POS Select programme number.Selection:Off/0 to 99*Off: give priority to a last memoryInitial VOL Level Adjust the volume when each time power isswitched on.Selection/Range:Off/0 to 100*Off: give priority to a last memoryMaximum VOLLevelAdjust maximum volume.Range:0 to 100Button Lock Select local key conditions.Selection:Off/SETUP/MENU/ALL*Off: altogether valid*Setup: only F-key is invalid(Tuning guide (menu) can not be selected.)*MENU: only F-key is invalid(only Volume/Mute can be selected.)*All: altogether invalid.Remote Lock Select remote control key conditions.Selection:Off/SETUP/MENU*Off: altogether valid*Setup: only Setup menu is invalidMENU: Picture/Sound/Setup menu are invalidHotel modeHotel mode OffInitial INPUT OffInitial POS OffInitial VOL Level OffMaximum Vol Level OffButton Lock OffRemote Lock OffSelectEXITRETURNChange17