- 109 -● If a view card and a card reader come as a set, first insert the card reader,then insert the view card into the card reader.● Insert or remove the CI module completely in the correct direction asshown.● Remove the CI module from the TV when placing the TV facing upward.This may cause damages to the CI module and CI slot.Using Common InterfaceThe Common Interface Module menu provides access to software containedin Common Interface (CI) Modules.● Video and audio signals may not be output depending on broadcasts orservices.■ Insert the CI module (optional)● The features that appear on screen are dependent on the contents of theselected CI module.● Follow the instructions that came with the viewing card to tune in theencrypted channels. If encrypted channels do not appear, perform thebelow to verify the card is recognised by the TV.● For more details, read the manual of the CI module, or check with thebroadcaster.4. Select Setup System Menu Common Interface with / and pressOK to access1. Select DVB with TV2. Display the menu with MENU3. Select Setup System Menu Common Interface with / and pressOK to access4. Press OK and follow the on-screen instructions● On-screen instructions may not correspond to the remote control buttons.Shipping ConditionShipping Condition
