Panasonic TX-L32EM6B Operating Instructions Manual

Contents

15Auto SetupAuto SetupSearch and store TV channels automatically.● These steps are not necessary if the setup has been completed by your local dealer.● Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before startingAuto Setup. For details of settings for the connected equipment, read the manual of the equipment.1 Plug the TV into mains socket and switch On● Takes a few seconds to be displayed.● If the red LED shows on the TV, press the Standby On / Off switch on the remote control.2 Select [Home]Select [Home] viewing environment to use in your home environment.Please select your viewing environment.Home Shop OK changeconfirm [Shop] viewing environment (for shop display only)[Shop] viewing environment is the demonstration mode to explain main features of this TV.Select [Home] viewing environment to use in your home environment.● You can return to viewing environment selection screen at the stage of [Shop] confirmation screen.1 Return to viewing environmentselection screen2 Select [Home]ShopYou have selected shop modeBACK/RETURNPlease select your viewing environment.Home Shop OK changeconfirmTo change viewing environment later on, you will need to initialise all settings by accessing[Shipping Condition]. [Shipping Condition] (p. 24)3 Select your countryCountry SelectionUnited Kingdom Ireland OK changeconfirm4 Start [Auto Setup]Example: UKCH 21 6962626262Auto Setup - DVB and AnalogueDVB ScanCH 21 69Analogue ScanThis will take about 6 minutes.Free TV : 4 Pay TV : 0 Radio : 0Searching100100CBBC ChannelE4100CH Channel Name Type QualityBBC Radio WalesFree TVFree TVFree TV100Cartoon Nwk Free TVData : 0 Analogue : 0If tuning has failed, check the connection ofthe RF cable, and then, follow the on screeninstructions.● Auto Setup will start to search for TVchannels and store them.● To initialise all settings[Shipping Condition] (p. 24)Auto Setup is now complete and your TV is ready for viewing.