Panasonic TX-L32EM6Y Operating Instructions Manual

5Accessories / OptionsQuick Start GuideAttaching / removing the pedestalWarningDo not disassemble or modify the pedestal.● Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than the one provided with this TV.● Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonicdealer immediately.During set-up, make sure that all screws are securely tightened.● If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injurymay result.Two or more people are required to install and remove the TV.● If two or more people are not present, the TV may be dropped, and personal injury may result.When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specifiedprocedure. (see below)● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.Assembly screws (8) Bracket BaseM4 × 14Assembly screws for base (4)M4 × 10Assembly screws for pedestal (4)1 Place the TV screen face-downon a cushioned, clean surface toprotect the screen from damagesand scratches.2 Assembling the pedestalUse the assembly screws to fastenthe bracket to the base securely.● Make sure that the screws aresecurely tightened.● Forcing the assembly screws thewrong way will strip the threads.3 Securing the TVA Adjust the position of thepedestal, then insert thepedestal to the TV screen.B Use the assembly screws tofasten securely.● Tighten the four assembly screwsloosely at first, then tighten themfirmly to fix securely.● Carry out the work on a horizontaland level surface.M4 × 14Hold thebracket notto fall overFrontM4 × 10ABRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.1 Place the TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket)for protecting the display screen.2 Remove assembly screws for pedestal with screw driver.3 Remove the pedestal from the TV.