Panasonic TX-L37V20E Operating Instructions Manual

Also see for Viera TX-L37V20E: Operating instructions

20How to Use Menu FunctionsMenu Item Adjustments / Configurations (alternatives)SoundSPDIF SelectionSPDIF : A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal(Auto / PCM)Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.HE-AAC (48 kHz) 5.1ch is output as DTS.MPEG is output as PCM.PCM : Digital output signal is fixed to PCM.For DVB mode, Network video contents or Video mode●MPEG Optical LevelAdjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initialsetting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)Normally, MPEG sound is larger comparing with the other types of audio track.●DVB mode only●HDMI1 / 2 / 3 / 4 InputSelect to fit the input signal (Digital / Analogue)Digital : HDMI cable connectionAnalogue : HDMI-DVI adapter cable connectionHDMI input mode only●SPDIF Delay Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if thesound does not synchronize the imageDVB mode only●Reset to Defaults Press the OK button to reset the present Sound Mode, Balance, Headphone Volumeand Surround to the default settingsSetupTimer Programming Sets a timer to remind watching or record forthcoming programmesDVB mode only●Off Timer Sets the time the TV automatically goes to Standby mode(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)USB HDD Setup Register the connected USB HDD and makes the settings for the recordingLink SettingsVIERA Link Sets to use VIERA Link functions (Off / On)HDMI ContentTypeAdjusts the picture settings according to the content type signal from the connectedequipment via HDMI cable (Off / Auto)This function is available if the connected equipment supports HDMI Content Type.●The content type information will be displayed for several seconds when this function●works.Q-Link Selects which AV terminal is to be used for data communication between this TV and acompatible recorder (AV1 / AV2)Select the connected terminal to the recorder even it is not compatible with Q-Link.●AV1 / AV2 outChooses the signal to be transmitted from the TV to Q-Link(TV / AV1 / AV2 / AV3 / Monitor)Monitor: Image displayed on screen●Component, PC and HDMI signals cannot be outputted.●Power on Link Sets to use Power on Link function (Off / On)Power off Link Sets to use Power off Link function (Off / On)Standby PowerSaveControls the power consumption in Standby mode of the connected equipment toreduce the consumption (Off / On)This function is available when “VIERA Link” is set to “On” and “Power off Link” is set●to “On”.Intelligent AutoStandbyMakes non-watched or non-used connected equipment go into Standby mode toreduce the power consumption (Off / On (With reminder) / On (No reminder))This function is available when “VIERA Link” is set to “On”.●Download Downloads channel, language, country / region settings to a Q-Link or VIERA Linkcompatible equipment connected to the TVDVB-S and DVB-C channel settings cannot be downloaded.●Child Lock Locks a channel / AV input to prevent access to it