- 15 -● Keep the TV away from electronic equipment (video equipment, etc.) orequipment with an infrared sensor, otherwise distortion of image / soundmay occur or operation of other equipment may be affected.● When using a SCART or HDMI cable, it is recommended to use fully wiredone.● Check the terminal type and cable plugs are correct when connecting.Selecting channel1. Display the TV Selection screen with TV2. Select the mode with / and press OK to setDVB-C / DVB-T / Analogue● The selectable modes vary depending on the channels stored.● You can also select the mode pressing TV repeatedly on the remotecontrol or INPUT/OK/HOLD for MENU button on the control panel ofthe TV.● If the TV Selection menu is not displayed, press TV to switch the mode.3. Select a channel with Channel Up / Down or numeric buttons● Press the numeric buttons to select a channel position with 2 or more-digit (e.g. 399, press ).■ To select a channel from the channel list1. Display the channel list with OK2. Select a channel from the list with / and press OK to watch● To sort channel names in alphabetical order(red)● To change the category(blue)■ To select a channel using information banner1. Display information banner with if it is not displayed2. Select a channel with / and press OK to watch while the banner isdisplayedWatching Basic Information banner
