English5Ensure that the TV does not fall over.If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injurymay result.Two or more people are required to install and remove the TV.If two or more people are not present, the TV may be dropped, and personal injury may result.When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specifiedprocedure. (see below)Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.Assembly screw (4)M5 × 15Assembly screw (4)M4 × 25BracketTBL5ZA32261 (TX-L32E5Y)TBL5ZA32591 (TX-L37E5Y)TBL5ZA32821 (TX-L42E5Y),(TX-L47E5Y)BaseTBL5ZX0280 (TX-L32E5Y)TBL5ZX0276 (TX-L37E5Y)TBL5ZX0272 (TX-L42E5Y)TBL5ZX04091 (TX-L47E5Y)1 Assembling the pedestalUse the assembly screws to fasten the bracketto the base securely.Make sure that the screws are securelytightened.Forcing the assembly screws the wrong waywill strip the threads.2 Securing the TVUse the assembly screws to fasten securely.Tighten the four assembly screws loosely at first, thentighten them firmly to fix securely.Carry out the work on a horizontal and level surface.BArrow markHole for pedestalinstallationDCAFrontRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.1 Remove the assembly screws from the TV.2 Pull out the pedestal from the TV.3 Remove the assembly screws from the bracket.Preventing the TV from falling overUsing the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to theinstallation surface.The place where the pedestal is to be fixed should be thick enough and made of hard material.Screw (not supplied)Diameter: 3 mmLength: 25 - 30 mmScrew hole