- 65 -3) Press BACK/RETURN to storeProxy Port:This number is also specified by the provider with the Proxy address.1) Select Proxy Port with /2) Enter the number with numeric buttons3) Press BACK/RETURN to store4. Select Network Status with / and press OK to accessHome network Network settings Network Status5. Select Exit with / and press OK to setCustom - Wireless Access PointYou can use the TV as a wireless access point and connect the networkequipment without an access point.● Confirm the PIN code, network settings of the equipment before startingsetup. For details, read the manual of the equipment.1. Display the menu with MENU2. Select Network Network Connection Custom Wireless Access Pointwith / / / and press OK to access3. Select Connect to device in WPS with / and press OK to access● To set manually, select Change settings. (see below)4. Select and set WPS(Push button) / WPS(PIN) with / and press OK toaccessWPS(Push button):Set the equipment to WPS (Push button) mode. For details, read themanual of the equipment.WPS(PIN):Enter the PIN code of the equipment.● If the connection has failed, check the settings and positions of theequipment. And then, follow the on-screen instructions.■ Change settings
