- 63 -● Do not turn the TV off, pull out the mains plug or remove the USB HDDduring operation (formatting, recording, etc.). Doing so may causemalfunction of the device or damage the recorded data. (An electricoutage may also be a cause of malfunction.)= Note =● Analogue TV programme cannot be recorded on the USB HDD.● The data broadcasting (MHEG, etc.), radio broadcasting will not berecorded, and also the recording function will not work during the periodwithout any signal.● Not all the programmes can be recorded depending on the broadcasterand service provider.● You cannot copy the recorded contents of the USB HDD.● For more information of the USB HDDRecording Technical information USB HDDSetting for USB HDDFormat and set up the USB HDD with this TV in order to use it for recording.All the USB devices recognised as a mass storage device will be listed.● Please note that USB HDD will be formatted and all data in it will beerased after this setup.● Before setting, connect the USB HDD and be sure to turn on the USBHDD.Recording USB HDD setup Preparations1. Display the menu with MENU2. Select Setup USB Device Setup with / and press OK to access3. Select the USB HDD for recording with / and press OK to start setup● Some USB HDD may not be displayed.● To display information of the highlighted device4. When the caution and confirmation screen for using USB HDD isdisplayed, select Yes with / and press OK to proceed5. When the confirmation screen of USB HDD name is displayed, select Yeswith / and press OK to set● The name for the USB HDD is created automatically. If you want to editthe name, select Yes.1) Enter characters with / / / or numeric buttons, and pressOK to set
