Panasonic TX-P50X60E Operating Instructions Manual

Also see for Viera TX-P42X60E: Operating instruction

Contents

English10Using the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu. Operation guideOperation guide will help your operation by using theremote control.Example: [Sound Menu]1/2000110Mode StandardBassTrebleEqualiserHeadphone VolumeSurroundAuto Gain ControlVolume CorrectionSpeaker Distance to WallOffOffOver 30cmMain MenuPictureSoundTimerSetupHelpSelect Selects your favourite soundmode. Page upChangeRETURN Page downOperation guideSelect Selects your favourite soundmode. Page upChangeRETURN Page downBalance How to use remote controlOpen the main menuMove the cursor / select from a range of options /select the menu item (up and down only) / adjustlevels (left and right only)Access the menu / store settings after adjustmentshave been made or options have been setReturn to the previous menuExit the menu system and return to the normalviewing screenFirst time Auto SetupAutomatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.These steps are not necessary if the setup has been completed by your local dealer.Please complete connections (p. 5 - 8) and settings (if necessary) of the connected equipment before starting AutoSetup. For details of settings for the connected equipment, read the manual of the equipment.1 Plug the TV into mains socket and turn power onTakes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Select the languageSelect [Home]Select [Home] viewing environment to use in your home environment.[Shop] is for shop display.To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.Select your countryDepending on the country you select, select your Region or store the Child Lock-PIN number (“0000” cannotbe stored).Tick the TV signal mode to tune, and then select [Start Auto Setup]: tune (search for the available channels): skip tuningAuto Setup screen varies depending on the country and the signal mode you select.[DVB-C Network Settings]Normally set [Frequency] and [Network ID] to [Auto].If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable providerwith numeric buttons.Auto Setup is now complete and your TV is ready for viewing.If tuning has failed, check the connection of the RF cable, and then follow the on-screen instructions.To retune all channels [Auto Setup] in [Tuning Menu] (Setup Menu)To add the available TV signal mode later [Add TV Signal] in [Tuning Menu] (Setup Menu)To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)