English14VIERA Touch Pad ControllerThis touch pad controller is designed for the convenient operations, especially, on Home Screen or internet contents.You can operate the TV intuitively with this controller.The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen toregister will appear in “First time Auto Setup” for first using the TV. (p. 16)After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).To use Standby On / Off switch, point the controller directly at the TV's remote control signal receiver because itworks with the infrared. (You can operate the switch without registration.)It is recommended to speak within about 15 cm from microphone of VIERA Touch Pad Controller when using VoiceControl function.2791012111853461 Standby On / Off switchSame function of the remote control button 1 (p. 13).2 Microphone3 Microphone button4 Touch pad (see below)5 [Option Menu]6 HOMESame function of the remote control button 17 (p. 13).7 Volume Up / DownSame function of the remote control button 11 (p. 13).8 APPSSame function of the remote control button 5 (p. 13).9 On-screen remote controlPress to display the remote control GUI (Graphical UserInterface). Press again to move the position of GUI. (Tochange the page of GUI, slide your finger to the left / righton the touch pad.)10 ReturnSame function of the remote control button 20 (p. 13).11 Channel Up / DownSame function of the remote control button 23 (p. 13).12 OK Touch PadTap the centre of the pad for “OK”. Slide your finger to move the cursor(on internet contents or [CursorSettings] in [VIERA Touch PadController] (Setup Menu)), select theitem, adjust levels, etc.Trace the fringe to scroll. Installing / Removing batteriesSlide openNote the correct polarity(+ or -)CloseNoteIt is recommended to hold the touch pad controller with your hand when using.The battery power will be used whenever you use the touch pad controller (including the touch of the touch pad) evenif not operating the TV. It may decrease the battery life.Some operations differ depending on the application.