Panasonic TY-TPEN6 - Stylus - Wireless Operating Instructions Manual

Also see for TY-TPEN6 - Stylus - Wireless: Service manual Service manual

Contents

7D prohibition : Recognizes the signals from anytouch pens regardless the Pen ID.ID no. 1 4 : Recognizes the signals only from thetouch pens with the same ID.Touch Pen ID setting and usePrior to touch pen ID settingCarefully read the Manual for the touch panel, andthen continue with the following procedure.1 Turn on the power to the plasma display andPC, in that order.2 Switch the plasma display input to PC.3 After the PC has finished starting up, open“Touch panel setting program” from the “TaskBar” on the PC screen, and click on the “BasicSetting” button.Touch Pen ID settingPerform the following operation on the touch panelwithin 5 meters. (16.4 feet)1 Turn the battery cap of the touch pen counter-clock-wise and remove it. (Be sure that batterieskeep staying in the touch pen.)2 Hold the touch pen so the pen tip is facingdownwards, press and hold the pen tip, andperform the following operation.1 Refit the battery cap and wait for at least 2seconds.2 Slowly press the function switch 3 times.3 Release the pen tip.4 Slowly press the function switch 3 times.5 Press the pen tip.The touch pen will enter the ID setting mode.Touch Panel setting for Pen IDPress “Pen ID Setting” on the “Basic Setting” screen.In order to use multiple touch pens and touch panels in close distance, it is necessary to set ID numbers for eachtouch pen and touch panel setting, so that all pens can be operated without interfering with each other.6 Press the function switch, and set the ID number.By pressing the function switch on the touchpen, ID number can be changed with thefollowing sequence.7 Press the pen tip. ID number will be set.SpecificationsID no.1 ID no.2 ID no.3 ID no.4BatteryBattery lifeSystemTransmitted informationData transmission timeIDs (Identification nos.)ID setting methodInfrared wavelengthBurst frequencyNumber of infrared LEDsTransmission distanceLR03, AAA, R03 ... 2 pcsApprox. 500 hours (With 1 operation per second, using 750 mAh alkaline dry cells)PIC microcomputer control, Infrared data transmission systemON/OFF status of pen tip switchID (Identification no.)Approx. 10 ms (1 block of data)4 nos.Pen : Set in ID setting modeTouch panel : Set with touch panel setting program940 nm38 kHz3Approx. 5 mEnglishBe sure to follow the above procedure whenchanging ID numbers.