|
Insert the diagnostics floppy diskStarting up the setup utilityTurn on the power.When "Panasonic Press F2 to enter setup" appearson the screen, press F2.Press " " to select ExitPress " " to select Get default valuePress Enter.Choose Yes for "Load default Configuration now?"Select "Save Values & Exit" and press Enter.Choose Yes for "Save Configuration changes and exit now?"and press Enter.Return the setupcontents to defaultChoose test fromthe menu screento start the test.Menu Screen1. DIAG on FD (CF-18 XP/2000 Model)2. DIAG on FD (CF-18 Tablet Model)3. LAN Test4. Modem Test5. Wireless LAN test (Wireless LAN Model only)6. Button TestQ. QuitSelect please [ 1, 2, 3, 4, 5, 6, Q ] ?Caution:After completing repairs, be sureto carry out the Automatic testand Peripheraltest. Tests selected (O) from the testitem list will be performed insuccession.DIAG on FDThe parallel port and CD-ROMdrive can be tested.(See 5.3 for details.)3. LAN Test4. Modem Test5. Wireless LAN test (Wireless LAN Model only)6. Button TestSpecifc tests required canbe freely selected andperformed from the test itemlist.Be sure to carry out the Selectiontest only when necessary.Problems in the unit are located and divided accordingto error messages that occur during testing.5 Self Diagnosis TestFloppy disk is Included for the self-diagnostic tests that should be performed before using this product.Important notice1. System passwordIf the password function has been turned on, you will need to ask the user for the passwordbefore performing the self-diagnostics.2. FDD testPerforming the FDD test will erase the contents of the floppy disk you insert into the drive. Usea formatted disk that has no contents or whose contents are not required. This product has apassword function. However, if this function is turned on, the self-diagnostics tests will not work.5.1. Outline of Self Diagnostic Tests5-1 PreviousNext |