9TouchscreenYou can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surfacewith the stylus (included).For further information, click (Start) - [All programs] - [Tablet PC] - [Tablet PC Touch Training]. To right-clickTouch and hold with the stylus, or touch and select the right button of “touch pointer”.NOTEz The touchscreen function does not work in the Setup Utility. Operate the touchscreen with your finger or with an approved stylusWhen using the touchscreen function, use only your finger or an approved stylus on the surface.Operating the touchscreen with an object other than your fingertip or the stylus (a fingernail or metal object, or other hardor sharp objects that may leave a mark) may scar or stain the surface, causing the touchscreen to malfunction. Do not apply too much pressure when operating the touchscreenOnly a light touch is required to operate the touchscreen. Applying too much pressure may damage the surface. When the touchscreen becomes dirty, wipe it with an approved soft clothThe touchscreen is specially treated to prevent dirt from adhering to the surface, so dirt can be removed easily using a drycloth (use only the approved soft cloth). If the dirt does not come off easily, breathe on the surface and try again.Do not apply water or solvents to the soft cloth. Clean the touchscreen while the computer is powered offCleaning the screen while the power is on may cause the computer to malfunction. Also, dirt on the touchscreen is easierto see when the computer is powered off, and so is easier to clean.Operation of the touchscreenMaintaining the performance of the touchscreen
