Panasonic Toughbook CF-28 Series Operating Instructions Manual

Also see for Toughbook CF-28 Series: Supplementary instructions Supplementary instructions Service manual Simplified service manual Service manual

Contents

11 Getting Started8 Setup WindowsMoving the cursor ( ) or clicking buttons can be performed with the touch pad.7 Dual OSSelect the Operating SystemWindows 2000 and Windows XP are preinstalled on the computer. After one of them isselected with the following procedure, only that operating system can be used.1 At the screen for the agreement of the selection of the operating system, press Y .2 With the number keys, select either Windows 2000 or Windows XP.(The selection of the operating system is only performed the first time the com-puter is started up. A change cannot be made after the selection.)3 At the confirmation message, press Y . The operating system preparation willstart, during which the computer will restart.4 When the screen indicating the completion of the operating system preparation isdisplayed, press any key.The computer will restart.CAUTIONDo not touch the keyboard. If you accidentally touch the keyboard and thecancel confirmation menu is displayed, do not cancel.During the Windows setup procedure, the desktop will be displayed as a smallscreen in the center of the LCD. After the setup procedure is completed and thecomputer is restarted, the desktop will be displayed as a full screen.NOTECAUTIONRemember this password! If the password is forgotten, Windows 2000 can-not be operated.6 Enter the correct date, time and time zone and then select [Next].You can also complete these settings at a later time.7 Enter your administrator password and then select [OK].If the cursor can not be pointed correctly with the stylus, perform [Calibration] in[Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen].3 Select settings for your region, then select [Next].4 Enter your name and organization and then select [Next].5 Enter your computer name and administrator password and then select [Next].1 At the [Welcome to the Windows 2000 Setup Wizard], select [Next].2 After reading the agreement, select [I accept this agreement] or [I don't acceptthis agreement], then select [Next].Do not press any key or move the touch pad until [Windows 2000 ProfessionalSetup] is displayed.Windows 2000CAUTIONIf [I don’t accept this agreement] is selected, the Windows setup will beaborted.NOTE