Panasonic Toughbook CF-31AAA7L1M Operating Instructions Manual

Also see for CF-31 Series: Supplementary instructions Operating instructions Operating instructions Reference manual Reference manual

Contents

25 Troubleshooting DisplayThe external display doesnot work normally.z If the external display does not support the power saving function, it may not work nor-mally when the computer enters the power saving mode. Turn off the external display.The cursor cannot be con-trolled properly.z Operate the following steps.A Restart the computer and press F2 or Del while [Panasonic] boot screen is dis-played.B Set [GPS] to [Disable] in the sub-menu of [Serial and Parallel Port Settings] in the[Advanced] menu of the Setup Utility.C Press F10 and select [Yes] at the confirmation message, and press Enter.The computer will restart.D Log on to Windows as an administrator.E Click (Start) and input “c:\util\drivers\gps\GPSVista.reg” in [Start Search], andpress Enter.F Click [Yes], click [Yes], and click [OK].Then restart the computer.G Press F2 while [Panasonic] boot screen is displayed.H Set [GPS] to [Enable] in the sub-menu of [Serial and Parallel Port Settings] in the[Advanced] menu.I Press F10 and select [Yes] at the confirmation message, and press Enter. Touch Pad / Touchscreen (only for model with touchscreen)The cursor does not work. z When using the external mouse, connect it correctly.z Restart the computer using the keyboard.Press and press Î two times, and press Ï to select [Restart] and press Enter.Press , U, and R to select [Restart].z If the computer does not respond to keyboard commands, read “No response”(Î page 26).Cannot input using the touchpad.z Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.z The drivers for some mice may disable the touch pad. Check your mouse’s operating instructions.Cannot input using the touchscreen. z Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.z Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the SetupUtility.Cannot point the correct posi-tion using the included stylus.z Perform the touchscreen calibration (Î page 15). Reference ManualThe Reference Manual isnot displayed.z Install Adobe Reader.A Log on to Windows as an administrator.B Click (Start) and input “c:\util\reader\Setup.exe” in [Search programs and files]then press Enter.C Update Adobe Reader to its latest version.If your computer is connected to the internet, start up Adobe Reader and click [Help]- [Check for Updates...].B Click [start] - [Run], input [c:\util\reader\Setup.exe], then click [OK].C Update Adobe Reader to its latest version.If your computer is connected to the internet, start up Adobe Reader and click [Help]- [Check for updates now].