Panasonic Toughbook CF-31AAAAA2M Reference Manual

Also see for CF-31 Series: Supplementary instructions Operating instructions Operating instructions Operating instructions Reference manual

69ModemThe computer automatically resumes from sleep *2 when the telephone connected to the modem rings.You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer tosleep *2 again afterward. For further information, refer to the instruction manual of the software application. To enable this function1 Click (Start) - [All Programs] - [Windows Fax and Scan].2 Click [Tools] - [Fax Settings].z A standard user needs to enter an administrator password.z Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and selectthe correct modem.3 Add a check mark for [Allow the device to receive fax calls] and click [OK].4 Click (Start) - [Computer] - [System properties] - [Device Manager].z A standard user needs to enter an administrator password.5 Double-click [Modems], and then double-click the internal modem.6 Click [Power Management] and add a check mark for [Allow this device to wake the com-puter], and then click [OK].1 Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -[Device Manager] - [Modems], and double-click the internal modem.2 Click [Power Management], add the check mark for [Allow this device to bring the com-puter out of standby.], and click [OK]. To set the time to return the computer to sleep*2The computer will enter sleep *2 after the set time even when the communication is not completed. You can avoid suchuncompleted communication if you select [Never], but the computer does not return to sleep *2 after resuming by a phone call.Ring Resume Function