Panasonic Toughbook CF-51PF66EBM Operating Instructions Manual

Also see for CF-51 Series: Operating instructions User manual Operating instructions Operating instructions Operating instructions

Contents

16Getting StartedUseful InformationTroubleshootingAppendixHard Disk Data Erase UtilityWhen disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage.Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with somespecial software. Use the hard disk data erase utility to erase the data completely.Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’slicense agreement.Preparationz Prepare the following items:• The Product Recovery DVD-ROM (included)• Panasonic CD/DVD drivez Remove all peripherals (except for the CD/DVD drive).z Connect the AC adaptor and do not remove it until hard disk data erase is complete.NOTEz Even if hard disk data erase is performed, the number of times of DVD’s region code setting will not be reset.1 Turn off the computer and insert the CD/DVD drive into the multimedia pocket(Î Reference Manual “Multimedia Pocket”).2 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-played.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.3 Select the [Boot] menu, then select [IDE MP] and press F6 until [IDE MP] is at the top ofthe boot priority order.4 Select the [Security] menu and set [MP CD/DVD Operation] to [Enable].5 Set the Product Recovery DVD-ROM into the CD/DVD drive.6 Press F10.At the confirmation message, select [Yes] and press Enter.The computer restarts.7 Press 2 to execute [2. [Erase HDD]].z To cancel this operation, press 0.8 At the confirmation message, press Y.9 When [<<< Start menu >>>] is displayed, press Enter.The approximate time required for erasing data will be displayed.10 Press Space.At the confirmation message, press Enter.The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.]message will appear. If a problem has occurred during the operation, an error message will appear.z To cancel partway, press Ctrl + C. The data erasure will be up to that point.11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-puter.The hard disk data erase utility erases the data using overwriting method. If a malfunction or other operational erroroccurs during the erasing process, the data may not be completely erased. Also there may be special devices to readthe erased data. To erase highly confidential data, ask a specialized company. Matsushita Electric Industrial Co., Ltd.will bear no responsibility for losses or damages suffered as a result of the use of this utility.