Panasonic Toughbook CF-52ELNBD2M Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

Panasonic Toughbook CF-52ELNBD2M Reference Manual Manual pdf 33 page image

33Writing to CD/DVD How to change the bootable disc image using B’s Recorder1 Run B’s Recorder, and click [View] - [Disc Capacity Display Settings] - [Bootable Disk].2 Select the required bootable disc image from [Floppy Disk Image Management], and click[OK].NOTEz The bootable disc image is saved in the folder “c:\Program Files\B’s Recorder GOLD9”. About the bootable disc imageThe following six types of bootable disc images can be used with the B’s Recorder preinstalled in this computer.*3 The program to restore the backup data by using the B’s Recorder “HDD Backup” function.NOTEz Bootable disc images BSDOS1.BIN and BSDOS2.BIN are specially designed for this computer.In the default setting, images BSDOS1.BIN and BSDOS2.BIN are selected.z If you boot the system using a disc created using bootable disc image BSDOS3.BIN or BSDOS4.BIN, one of the fol-lowing error messages may be displayed, but this is not a malfunction.• CD-ROM Drive is not ready, aborting installation.• Not found CDROM !!• Check CD-ROM power and IDE cable.• CD-ROM drive is not available.z If you want to share a bootable disc with CF-52A/B/C/D series and CF-74C/D/E/F/G/H series, select bootable discimage BSDOS3.BIN or BSDOS4.BIN.Disc Image Contents B’s restore program*3BSDOS1.BIN Image that can be booted from this computer Not PerformableBSDOS2.BIN PerformableBSDOS3.BIN Image that can be booted from this computer or a drive connected withParallel ATA interfaceNot PerformableBSDOS4.BIN PerformableBSDOS5.BIN Image that can be booted from a drive connected with Parallel ATA inter-face (Not available on this computer)Not PerformableBSDOS6.BIN Performable