Panasonic Toughbook CF-71 Series Reference Manual

Also see for CF-71 Series: Operating instructions Reference manual Operating instructions Reference manual Reference manual

44List of Error Codes02F5: DMA Test FailedServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.02F6: Software NMI FailedServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).02F7: Fail - Safe Timer NMI FailedServerBIOS2 test error: Fail-Safe Timer takes too long.device address ConflictAddress conflict for specified device.Allocation Error for: deviceRun ISA or EISA Configuration Utility to resolve resource conflict for the specified device.CD ROM DriveCD ROM Drive identified.Entering SETUP ...Starting Setup Utility.Failing Bits : nnnnThe hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the mapindicates a failed bit. See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.Fixed Disk nFixed disk n (0-3) identified.Invalid System Configuration DataProblem with NVRAM (CMOS) data.I/O device IRQ conflictI/O device IRQ conflict error.PS/2 Mouse Boot Summary Screen:PS/2 Mouse installed.nnnn kB Extended RAM PassedWhere nnnn is the amount of RAM in kilobytes successfully tested.nnnn Cache SRAM PassedWhere nnnn is the amount of system cache in kilobytes successfully tested.nnnn kB Shadow RAM PassedWhere nnnn is the amount of shadow RAM in kilobytes successfully tested.nnnn kB System RAM PassedWhere nnnn is the amount of system RAM in kilobytes successfully tested.Operating System not foundOperating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: areproperly identified.Parity Check 1 nnnnParity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannotlocate the address, it displays ????. Parity is a method for checking errors in binary data. A parity error indicates thatsome data has been corrupted.Parity Check 2 nnnnParity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locatethe address, it displays ????.Press to resume, to Setup, for previousDisplayed after any recoverable error message. Press to start the boot process or to enter a Setup andchange the settings. Press to display the previous screen (usually an initialization error of an Option ROM, I.e.,an add-on card). Write down and follow the information shown on the screen.Press to enter SetupOptional message displayed during POST. Can be turned off in Setup.PS/2 Mouse:PS/2 mouse identified.System BIOS shadowedSystem BIOS copied to shadow RAM.UMB upper limit segment address : nnnnDisplays the address nnnn of the upper limit of Upper Memory Blocks, indicating released segments of the BIOSwhich can be reclaimed by a virtual memory manager.Video BIOS shadowedVideo BIOS successfully copied to shadow RAM.