Panasonic Toughbook CF-74CCB02BM Operating Instructions Manual

Also see for CF-74 Series: Operating instructions Supplementary guide Supplementary guide Supplementary instructions Operating instructions

Contents

15 Getting StartedUseful InformationTroubleshootingAppendixCAUTIONz You cannot choose the following words for user name and password: CON,PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.z You can change the user name, password, image and security setting aftersetup of Windows.z Remember your password. If you forget the password, you cannot use the Win-dows. Creating a password reset disk beforehand is recommended.z The wallpaper for the first logon user has already been set on “4 Setup Windows.”.When using this computer under the Sun, the screen becomes easily viewableby changing the wallpaper to the white wallpaper.A Right-click on the desktop, and click [Personalize] - [Desktop Background].B Select [Solid Colors] at [Picture Location].C Select the white wallpaper and click [OK].z When you set date/time/time zone and click [Next], the screen may not go to thenext step for a few minutes. Do not touch the keyboard or touch pad, and waituntil the screen changes.z If “An unexpected error has occurred …” (or a similar message) is displayed,click [OK]. This is not a malfunction.z Wait until the hard disk drive indicator has turned off.A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].CAUTIONz Remember your password. If you forget the password, you cannot use the Win-dows operation system. Creating a password reset disk beforehand is recom-mended.z At first, log on to Windows as an administrator, and perform this calibration.A Click (Start) - [Control Panel] - [Additional Options] - [Tablet Calibration].B Using the stylus, touch each of the 9 “+” target marks one by one.z Perform the following calibration for each user.A Click (Start) - [Control Panel] - [Mobile PC] - [Tablet PC Settings].B Click [Calibrate].C Using the stylus, touch each of the four “+” target marks one by one, and thenclick [OK].z Perform the calibration for the orientation to be used.A Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch ScreenCalibration Utility].B Using the stylus, touch each of the 12 “+” target marks one by one until itblinks, and then click [Calibration].C Click [Save & Exit].5 Create a new account.6 Perform the touchscreen calibration