Panasonic Toughbook CF-H1ADBBZCM Reference Manual

Also see for CF-H1 Series: Supplementary instructions Operating instructions Reference manual Operating instructions Operating instructions

69Hardware DiagnosticsNOTEz For the hard disk drive and memory only, you can select standard diagnostic check or extended diagnostic check.When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.z You cannot operate the PC-Diagnostic Utility by touching the screen.Run this utility using the default settings in the Setup Utility.If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray.1 Connect the AC adaptor.During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices.2 Turn on or restart the computer, and press F2 or Del while [Panasonic] boot screen is dis-played.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.z If you are using the computer after changing the settings from the status at the time of purchase, we recommendthat you make a note of the settings that are changed.3 Press F9.At the confirmation message, select [Yes] and press (Enter).Regarding the PC-Diagnostic UtilityOperations External mouse operations Keyboard operationsSelect icon Place the cursor above the icon Press Space and then press(( close) cannot be selected)Click the icon Click (right click cannot be used) Press Space above the iconComplete the PC-DiagnosticsUtility and then restart the com-puterClick (close) Press Ctrl + Alt + Del.Running the Diagnostic Check